AirQR
Orders & POS

Running Game Zone at the counter (timers, alerts, stopping and billing)

How staff run Game Zone day to day. Start a station on a new or open check, watch the clocks, get the time's-up alert, extend, pause or move a session, stop and bill it with the right round-off, and settle the game time and the food on one bill.

27 min read

This is the day-to-day side of Game Zone. You set up the activities, prices and stations once: see Game Zone setup. Guests booking ahead and the station QR codes are in Game Zone for guests, station QR codes and game bookings.

What is the Game Zone board?

Open Game Zone in the sidebar. The board opens on Floor: your stations on a floor plan, like the Tables floor. Switch to List at the top for compact cards grouped by activity, in a grid (two across on a phone, up to five on a wide screen). The choice is in the address (?view=list for List), so a refresh or a shared link opens the same view.

  • A timer counts down to its end. After the end it turns red and keeps counting the time over.
  • An open session counts up. A pack counts down like a timer.
  • A paused session stands still and is dimmed.
  • In List, use the filters at the top: All, Free, In use or Time's up (buttons on a laptop, a dropdown on a phone), and a dropdown for All activities or one activity. Each card shows the station, its status badge (Free, In use, Ending soon, Time's up, Paused or Out of order), the clock, the amount so far and the check it is billed on. Start is on a free card and Stop & bill on a running one. Tap the card itself for the station window with Add items, Take payment, Extend, Pause and Move, the same window the Floor opens.
  • Food on the check. When the station's check has food in the kitchen (with a kitchen display), the card, the Floor tile and the station window show Preparing, then Ready to serve once the kitchen marks it ready, so whoever is on the floor knows to carry it over. On a Floor tile it is a small chef-hat badge.
  • Bookings at the top opens the day's bookings. A station's card shows the next booking on it.

The board and the POS update by themselves when anyone starts, stops or changes a session on another device.

The Floor: tap, press and hold, and Edit floor

Each tile draws the real thing, such as a pool table, a court or a gaming desk, with a small label at the bottom that shows the station's name and its clock, or Free or Out of order.

  • Tap a free station to start it. The Start window opens with that station already chosen.
  • Tap a station in use to open its window, laid out like a table's on the Tables floor. At the top are its state (In use, Ending soon, Time's up or Paused), the big clock and when it ends. Below is the station's bill: the game line, the food on it, and Total, Paid and Due ("Game time is final when you stop."). Then the main buttons: Add items (people who can use the POS), Take payment · keep playing (people who can take payments) and Stop & bill. Under them a short note says "The game keeps running. Use Stop & bill when they finish." Once the bill is paid up, the payment button reads Paid up · Stop & bill to finish and can't be pressed. Under them are Extend, Pause or Resume and Move. If the bill is not on a table and Tables is on, Move this bill to a table puts it on a free table; the session keeps running.
  • Press and hold a station (on a mouse: right-click or double-click; on a keyboard: Shift+Enter) for more options. A free station offers Start, Start free (for people who can correct Game Zone time) and Mark out of order (for people who can set up Game Zone). A station in use offers Stop & bill, Open the bill in the POS, Add another station to this bill, Adjust (for people who can correct Game Zone time: the Stop window with its corrections open) and Cancel session. An out-of-order station offers Back in service.
  • Areas. If you have dining areas like Main or Terrace with stations on them, each is a tab, and Game Zone is the tab for stations that stand in no dining area. Each tab shows how many of its stations are free, like 2/3. A station counts as free when no session is running on it and it is not out of order. With only the Game Zone area in use, there are no tabs. If you use Tables, that area's tables appear as faded outlines for context. They can't be touched here.
  • Outlines. A line under the plan says what each outline means: Free, In use, Ending soon, Over time and Out of order.
  • Not on the floor (n) lists the stations you haven't placed. Tap or hold one to use it like any other. If you have not placed any station yet, the Floor shows them all as tiles, ready to use.

Edit floor. People with the permission Set up Game Zone (owners and managers) see an Edit floor button. Press it to drag tiles into place; they snap to a grid, and every move saves the moment you drop it. Use Place here on a station under Not on the floor to put it on the area you are looking at. Place all on the floor puts every station that isn't on the floor into the Game Zone area at once, each activity's stations together in a row. Tap a placed tile to choose its Area (a dining area or Game Zone), or press Remove from floor to take it back to Board only.

To add a station right there, press Add station, type its Name, pick its Activity and press Add station. It goes on the area you are looking at, at a free spot sized for the activity, and gets its own QR code, like stations added in Setup. Press Done when you finish. On a phone the plan scrolls inside its own box, so you can still scroll the page. If someone moved the stations on another device while you worked, the move is refused ("The stations were moved on another device…") and the screen shows the latest places.

Stations on the floor also show on the live Tables floor: see Live floor. Tapping one there opens this board on that station, with its tile briefly outlined.

The Game Zone board in the Android app

In the Android app, More → Game Zone (or the Game Zone tab for people whose work is Game Zone) has Floor and List at the top. Floor draws each station where you placed it on the web, one dining area at a time plus the Game Zone area, each with its status and the time left. If your AirQR website has not been updated for this yet, Floor shows tiles grouped by activity instead. List shows a card per station with its clock. Tap a station to start a session, or to pause, add time, or stop it. Bookings at the top opens the day's game bookings, where Check in starts a booked guest's session (see Game bookings). Where Tables is on, the Tables floor in the app also has a Game Zone area with the stations the web places there. Both need Game Zone switched on and the permission to run it. By default owners, managers, cashiers and waiters have it; an owner can change this under Team → Staff → Roles. Owners and managers also see a Set up button for activities, prices and stations (see Game Zone setup). Placing stations on the floor plan stays on the website.

How do I start a session?

  1. Tap a free station on the Floor, press Start on its card in List, or press Start session at the top. The window names the station and shows the activity and its price; Change next to it opens a list of every station, grouped by activity, with a search box when you have many, and shows which are Free or In use (with the minutes left). From Start session, first tap the activity, such as PlayStation 5 · 2 of 4 free: the first free station of it is chosen for you.
  2. Under How is it sold? choose how it is sold. Open counts up and bills the time played. Timer counts down and alerts at the end: pick 30m, 45m, 1h, 1h 30m or 2h, or press Other to type any length. In the Other box type minutes ("45"), hours and minutes ("1h 30m"), or switch to hr and type hours ("2.5"). Under the box you see how it was read, and Start waits until it is a length that works (the most is 24 hours). A length under the activity's minimum time is allowed and billed as the minimum. Pack is a flat price for a block of time, like 3 hours: tap the pack you want. For per-game activities like bowling you tap one of the options.
  3. Set the number of Players with the - and + buttons. Under the label you see how many the price includes and what each extra player costs per hour, when the price says so.
  4. Whose bill? is one row, New bill for the station ("Food can be added to it later."): its own bill, which is what you want most of the time. Press Change to see all the choices: Add to a bill that's already open and pick one from the list, or Add to a table (only when Tables is on) and pick the table. A long list of open bills has a search box for the table, token or name. Each bill shows what it comes to so far and when it was opened. Change is not shown when there is no open bill and no table to choose.
  5. People who can take payments also see Take payment now. Tick it to pay for what you are starting (a pack, or an hour) before the guest plays: after Start the POS opens the payment for that amount. The bill stays open for food and extra time. See Paying ahead.
  6. Press Start. The line beside the button shows what you are about to start and what it comes to, for example "1h 30m · 2 players → ₹225".

People who can correct Game Zone time also see a small Start free link under Whose bill?. It bills nothing and is noted in the activity log; Undo turns it off again.

The price shown is what the guest pays if the session runs the planned time. A session is billed for the time actually played, so stopping at 50 of 60 minutes bills 50 minutes (rounded to your billing block, as set in the activity).

In the POS check panel the running and paused sessions of the check sit at the top, above the food, as one row each: the station and activity, a live clock (time left, or time over in red) and a small Stop button. With one or two sessions the rows sit under Game Zone · 2 with an Open board link. With three or more they fold into one line such as 4 sessions running, with next ends in 12:40, or 1 over time in red when a session has run out. Tap the line to open the rows, and tap it again to fold them. A session that is over time always stays as a row, even when the others are folded. Your choice is kept for that check while the POS stays open. Stopped sessions are lines on the check, with Adjust for people who may use it.

Starting a game from the POS

In the POS, games sit next to the dishes:

  • Search. Type the activity's name, a common word for it, or its Short code (set in the activity, see Game Zone setup). "PS5" finds PlayStation 5, "billiards" finds Pool. The games show first, above the dishes. When the box holds exactly an activity's code and no dish has that code, Enter opens its Start window.
  • Games. The Games chip after All lists every activity as a tile with what is free right now: 2 of 4 free, or All busy · next free in 12 min when a timer is about to end. A tile where every station is busy or out of order can't be tapped.
  • Tap a tile to start it: the first free station of that activity is chosen (Change picks another), and the game goes on the check on screen (the window says "On this bill" and the choice is fixed). On a new, empty POS screen it starts one on a new check and opens that check.

The Game Zone button next to the search box opens the same window for any activity. Hold the pointer on the Games chip and it says Start a game on this bill (or Start a game on a new bill when no check is open).

The game time is a line on the check, with the activity's tax class: for example "PS5 · PS5-2 · 1h 25m (1h + 25m extra)". It sits on the same bill as the food, each in its own tax. It never goes to the kitchen and never prints a KOT.

A station can have one session at a time. A check can have several.

Games are offered on dine-in checks only. The Games chip, the game search results and the Game Zone button are hidden when the check is takeaway, delivery or a platform order, or when the new order's type is one of those.

Running stations in the POS

  • Open checks. A Game Zone · n section at the top lists the checks that have a running station, each with its stations, a small clock for the one that needs a look first (time's up first, then the least time left) and the amount due. Open board goes to the board. A check without a table (a station's bill) is listed only here; a table's check stays in the main list too, with a small game icon, so "Table 4" is where you always find it.
  • Back to Game Zone. When the POS was opened from a station (Add items, Take payment · keep playing, Open the bill in the POS, Settle), the arrow at the left of the search box says Game Zone and returns to the board, on the view you left: Floor or List, the same area tab and the same filters. Send (while Go back to the floor after Send is on in POS → Settings → POS settings) and a settled bill return there the same way, just like the Tables floor.
  • Move to table and Merge. The bill of a station ("Game Zone · PS5-2") has Move to table and a merge control in its header (when Tables is on and you may move checks). A bill moved to a table becomes that table's check and loses its counter token, because it is now served at the table. Merging into a table's check carries the session along.

Paying ahead (packs and timers)

A payment taken before Stop is an ordinary payment on the station's bill. It is not a deposit or a wallet, and nothing is stored apart from the bill. Pay ahead with Take payment now in the Start window, with Take payment · keep playing in the station window, or with Pay then Take a payment now · keep playing in the POS. The payment window says "PS5-2 is still running. This payment stays on the bill; settle the rest after Stop." and its button reads Record ₹250.00 · keep playing. Food ordered meanwhile goes on the same bill, and the station window shows Total, Paid and Due.

Take payment · keep playing in the station window starts at what is still due on the bill (Total minus Paid), not at the game's price again. After you record it, "₹250.00 recorded · PS5-2 is still running" confirms it and you're back in the station's window, where Paid has gone up and Due has gone down. The game keeps running and the bill stays open: it closes only at Stop & bill, when the final game time is known. When nothing is due, the button reads Paid up · Stop & bill to finish. The payment button can't record the same payment twice, even if it's tapped again while it's saving.

What happens at Stop:

  • Pack, stopped early: the game line stays at the pack price and is never refunded. If nothing else is due, the check closes by itself. Otherwise press Settle for what is due.
  • Pack, played over: the pack price plus the extra time at the hourly rate. Settle the difference and any unpaid food.
  • Timer paid ahead, stopped early: the line drops to the time played, so the check shows To return. Press Return ₹33.00 (the payment window's "Return ₹33.00 & close check").
  • Timer or open, played over: the time played is billed and Settle takes the difference.

A pack is the "paid ahead and never refunded" choice: add a 1-hour pack if you sell a non-refundable hour. A timer always bills the time played, so paying ahead on a timer can leave something to return.

How do I extend, pause or move a session?

After tapping a station in use (on the Floor or a card in List):

  • Pause stops the clock. Resume carries on with the time the guest had left. The alerts move with it.
  • Extend opens a window headed "Extend PS5-2" with the end time and the time left under the name. Under How much longer? pick 15m, 30m, 45m or 1h, or Other to type any length, such as 50, 1h 30m or 2.5 with hr picked. The line above the button shows the New end time and what the longer plan adds to the price. Press Extend by 30m (the button names the length you picked). The alert moves to the new end and fires again. Extending changes the alert only. The bill still follows the time actually played. Open sessions have no end, so they can't be extended.
  • Move opens a window headed "Move PS5-2" with the note "The clock and the bill line move with it." Under Move to which station? tap one of the free stations of the same activity, for example when a controller breaks. With more than 6 free stations they are a list with a search box. The first one is already picked, so one tap on Move to PS5-5 finishes it. If none is free the window says so. The clock and the bill carry over. A different activity means stopping this session and starting a new one on the same check.

How do I stop and bill a session?

Press Stop & bill on the card or after tapping the station, or Stop on the session's row in the POS check panel. The window is headed "Stop & bill PS5-2". At the top, the time Played is shown large with the On the bill amount beside it. When you round off, Billed as 1h appears under the played time, and Planned shows the time the guest booked. Below are the lines of how the price was worked out. Press the big Stop & bill ₹120.00 button, which always shows the amount you are about to bill, to finish. The line on the check turns from an estimate into the final amount, and the station is free again. Keep playing (on a phone, the close button) closes the window and changes nothing.

Round off

Often the guest played 1h 25m and you want to bill 1h 20m or 1h. Under Round off there are one-tap choices:

  • Bill as … the planned time, when they played longer than planned,
  • Round down to … one billing block less,
  • Bill as … the whole hour below.

Anyone who can run sessions can bill down by up to the Round off limit in Game Zone → Setup → Settings (10 minutes to start with). The choices above it are not shown to them. Set the limit to 0 and only managers round off. A manager or owner (the permission Correct Game Zone time) can cut more. Nobody below that can bill more than the calculated time.

Every round-off is written to the activity log with the calculated and the billed minutes and amounts. The bill shows the billed time only. The few free minutes you set on the activity (Free minutes) are the automatic version of this: a minute or two over is never charged.

A pack is never billed under its price, whatever you round to. A per-game option has no minutes to round.

What managers can adjust

In the same window people with Correct Game Zone time can open Adjust the bill to type an Exact amount, or say when it really stopped (for a session that was forgotten for an hour). They can also start a session free (the Start free link in the Start window, or Start free when you press and hold a station; noted in the activity log) and Cancel session, which bills nothing, voids its line and frees the station. Every change is written to the activity log with the figures before and after.

After a session has stopped, it can still be corrected while its check is open. In the POS, open the check and press Adjust beside the session's game line (people with Correct Game Zone time see it; it is not there once the check is closed). The window is headed Adjust PS5-2 and shows the minutes played and what is on the bill, under the question What do you want to change?. Choose one change: Really stopped at (a day and time between the start and now, on the outlet's clock), Bill these minutes, No charge for extra time (only when the session had a planned time, so a timer or a pack) or Exact amount. A session priced per game offers Exact amount only. Add a Reason if you like and press Save: the game line is rewritten and the change is written to the activity log. If the session was changed on another device meanwhile, AirQR says so and refreshes the check; open Adjust again.

What happens when the time is up?

You get an alert at the planned end, and a warning a few minutes before it (Warn staff before time is up in Game Zone settings; 0 turns it off). On a screen where AirQR is open you get a chime and a message such as "PS5-2: time's up" with a button to open the board. The same alerts reach phones as push notifications for everyone who runs sessions, see Notifications. Each person can turn them off or change them there.

The alert fires at the exact second when one AirQR screen is open at the counter: the board, the POS or any dashboard page. There is no server watching the clock. If every screen was closed at the deadline, the alert goes out the next time anyone opens AirQR at that outlet. The bill is never affected: it always uses the real stop time. So keep one screen open on a tablet at the counter, on the board or the POS.

Keep screen awake

Tablets and phones dim and lock after a while, and a locked screen can't ring. The small sun button at the top of the board and the POS keeps the screen on while that page is open.

  • It is off every time. It is never remembered. Leaving the page, closing the app, reloading or signing out turns it off, so a tablet is never left awake by accident.
  • While it is on the sun is filled in and says Keep screen awake: on.
  • It works only while that page is the visible one, and only on browsers and apps that allow it (iPhone and iPad from iOS 16.4, Chrome, Edge and the installed AirQR app). Where it isn't allowed, the button isn't shown.
  • A tablet left on the board at the counter is the setup that works.

How do I settle the check?

There are two ways, and both end with one payment for the game and the food.

From the board. Tap the station and press Stop & bill, then Stop & bill ₹133.00 in the Stop window. The window turns into "PS5-2 stopped" with Total, Paid and Due, and Settle ₹433.00 (or Return when too much was paid), Add items and Done. On a laptop Done is the quiet button on the left; on a phone the buttons stack full width with Settle first and Done last. When the stop pays the check up exactly, the check closes by itself. If another station is still running on the same bill, the window just says "PS5-2 stopped. PS5-3 is still running on this bill." and closes.

From the POS. Press Pay on a check with a running station. The window "PS5-2 is still running" offers Stop & settle, Take a payment now · keep playing (people who can take payments, while something is due) and Keep playing. Stop & settle opens a Stop window for each running station in turn ("Next: PS5-2, then payment") and then opens the payment by itself. Take a payment now · keep playing records a payment and keeps the stations running (see Paying ahead). When what has been paid already covers the bill, the payment window says "Paid up for now. Stop PS5-2 to settle the bill." Under the totals the POS says "PS5-2 is still running. Its time is settled at Stop."

Splitting the bill by items or equally is possible once every station is stopped. While one runs, the split is refused ("Stop PS5-2 first"). If the guest already paid the amount on the screen, the payment is kept and the check stays open until you stop the session. If the final time is less than what was paid, the check stays open for you to return the difference with Settle.

The game time and the food are one bill, and one payment. Discounts and offers on the whole bill apply to the game time too. Offers on dishes (for example "10% on fries") never apply to game time. An offer or coupon made for Game Zone activities does, see Offers on game time. The service charge, if you have one on dine-in bills, covers the whole bill, game time included.

A check with a game line on it is settled online. The offline POS has no Game Zone controls: on a check with a running session it won't take payment or print the bill ("PS5-2 is still running. Stop it online…"), and a close that syncs from an offline device never closes such a check. It stays open until you stop the session. If a session was started online after the offline device last updated, the device does not know it is running and can still print a bill. AirQR keeps that bill's number, but its game time is only an estimate, so it adds a line to Changes to review telling you to stop the session on the board and print the bill again. A check with a running session can't be split into separate bills either.

Offers on game time

In Offers & coupons, an offer that takes a percent or an amount off chosen dishes can also target Game Zone activities: tick All games and activities, or pick activities such as PlayStation 5 or Pool. The block is shown only while Game Zone is on at the outlet. For example, 20% off PlayStation 5 on weekday afternoons, or a coupon POOL50 for ₹50 off Pool.

  • Automatic offers are checked when the session starts. If one is running then (right days and times, with In-store (POS) ticked under Where), it goes on the game line, and it stays on that line when the session is extended, paused, stopped or adjusted: the discount is worked out again from the new amount, never added twice. An offer that starts later in the session is not added at stop.
  • Coupons are applied in the POS like any coupon and discount the game lines on the check at that moment.
  • The discount comes off the game time before tax, so the GST on the game line is worked out on the discounted amount, just like a dish.
  • An offer only for games is not shown as a banner on the food menu.

What if the check is cancelled, voided or merged?

  • Cancelling the check cancels its running sessions, and the stations are free again.
  • Voiding the game line (in the POS, the pencil beside the line, with a reason) cancels the session too. This needs the permission to void items.
  • You can't change a game line's quantity or amount by hand. Stop or extend the session, or use Adjust beside its line on the open check (see What managers can adjust).
  • Merging a check into another one carries its sessions along. A running timer keeps running and is billed on the merged check.
  • Moving a check to another table doesn't affect its sessions.

Common situations

  • A walk-in plays, then orders food. Start the station on New bill for the station. Add the food with Add items in the station window, or from Open checks in the POS. Settle once at the end. Use a separate bill only when someone else pays for the food now and wants a receipt of their own: ring it as a normal counter order.
  • A table guest goes to play. Open the table's check in the POS, press the Games chip, pick the activity and start it: the window says "On this bill". It goes on the table's bill. Use New bill for the station instead if the player pays for their own game.
  • A guest plays first, then sits down to eat. Use Move this bill to a table in the station window (or Move to table in the POS). If the table already has the party's check, use Merge instead.
  • A group of friends, one payer. Start the first station on its own bill, then in the hold menu choose Add another station to this bill. Put the food on the same bill. At the end press Pay and Stop & settle. Split the bill by items or equally if they pay separately.
  • A group, each paying their own. Start each station on New bill for its own station.
  • A guest who booked ahead. Bookings → Check in opens Start filled in. Tick Take payment now if they pay at arrival. No deposit is taken online.

Where do I see the numbers?

Under Analytics, Game sessions lists every session with its station, times, minutes played and planned, extra time, players, amount and who started and stopped it, and Station utilisation shows hours, revenue and how much of your opening hours each station was in use. The item reports (Item summary and the others) count dishes only, so game time is not in them. It is in the sales totals and the executive summary. See Reports.

On Orders, a check with no table that belongs to a station is labelled Game Zone · PS5-2, and so is the printed bill.

Common questions

Can a guest start a session themselves? No. Staff start it, from the board, the POS or a booking. A guest scanning the station QR sees their time and can order food to the station, which goes on the same check.

Why does a check with food and a game stay open after payment? A counter check with a token that has food in the kitchen follows the counter-pickup flow like any other: it closes when the food is handed over, and only once its game sessions are stopped. Handing the food over while a session still runs is refused with "Stop PS5-2 first". A check with only game time closes as soon as it is paid and the session is stopped.

What if the power goes off or the tablet restarts? Sessions live on the server, not on the screen. Open the board again and every clock is where it should be.

New to AirQR?

Try everything free for 28 days, no card needed. Already a customer? Sign in to follow these steps in your dashboard.

Still stuck? Contact support at support@airqr.in.